Dse7510 Auto Start Load Share Controller

Model NO.: dse7510 Usage: Common Units Cooling
Method: Water Cooling Generator
Type: Diesel Generator Trademark: DSE Origin: UK Conditions
of Use: Land Use Output Type: AC Three Phase Installation
Method: Portable Model: Dse7510 Specification: original Dse7510 Auto Start Load Share Controller

Features

The DSE7510 is an Automatic Engine Control Module, designed to provide advanced load share functionality for diesel and gas generating sets that include electronic and non-electronic engines.

The module's load share functions include automatic synchronising with built-in synchroscope and closing onto dead bus. Direct and flexible outputs from the module are provided to allow connection to the most commonly used speed governors and automatic voltage regulators (AVRs).

A sophisticated module monitoring an extensive number of engine parameters, the DSE7510 will annunciate engine shutdowns, warnings, and engine status information on the back-lit LCD screen, by illuminated LED, on a remote PC, by audible alarm and via SMS text alerts (GSM modem required). The module includes RS232 and RS485 ports as well as dedicated terminals for system expansion.

SPECIFICATION
DC SUPPLY
 8 V to 35 V continuous
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing
supply was at least 10 V before dropout and
supply recovers to 5 V. This is achieved
without the need for internal batteries
MAXIMUM OPERATING CURRENT
460 mA at 12 V, 245 mA at 24 V
MAXIMUM STANDBY CURRENT
375 mA at 12 V, 200 mA at 24 V
CHARGE FAIL/EXCITATION RANGE
0 V to 35 V
OUTPUTS
OUTPUT A (FUEL)
15 A DC at supply voltage
OUTPUT B (START)
15 A DC at supply voltage
OUTPUTS C & D
8 A 250 V (Volt free)
AUXILIARY OUTPUTS E,F,G
2 A DC at supply voltage
GENERATOR
VOLTAGE RANGE
15 V - 333 V AC (L-N)
FREQUENCY RANGE
3.5 Hz to 75 Hz
MAGNETIC PICK UP
VOLTAGE RANGE
+/- 0.5 V to 70 V
FREQUENCY RANGE
10,000 Hz (max)
BUILT-IN GOVERNOR CONTROL
Fully Isolated
Minimum Load Impedance:
1000Ω
Gain Volts 0 V - 10 V DC
Offset Volts + / - 10 V DC
BUILT-IN AVR CONTROL
Fully Isolated
Minimum Load Impedance: 1000Ω
Gain Volts 0 V - 10 V DC
Offset Volts + / - 10 V DC
DIMENSIONS OVERALL
240 mm x 172 mm x 57 mm
9.4" x 6.8" x 2.2"
PANEL CUTOUT
220 mm x 160 mm
8.7" x 6.3"
MAXIMUM PANEL THICKNESS
8 mm
0.3"

Contact us if you need more details on Dse7510. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Dse7510 Controller、Controller. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Spare parts for Genset